Production Proven, Complex Semiconductor IP Cores

Low Energy, Low Cost SoCs

T2M › Bluetooth › Bluetooth Low Energy 5.1 MESH SoC

Bluetooth Low Energy 5.1 MESH SoC

Description and Features

The Bluetooth Low Energy (BLE) 5.1 MESH chip with internal Flash and audio support combines the features and functions needed for all 2.4GHz IoT standards. It supports multiple standards including Bluetooth Low Energy (BLE) 5.1 with up to 8 antenna indoor positioning support, Bluetooth Low Energy (BLE) Mesh standards. The embedded FLASH enables dynamic stack and profile configuration, and the final end product functionality is configurable via software, providing ultimate flexibility. The SoC also has hardware OTA upgrades support and multiple boot switching, allowing convenient product feature roll outs and upgrades. The MESH SoC supports single-channel analog mic or dual-channel digital microphone, and stereo audio output with enhanced voice performance for voice search and other such applications. The MESH SoC have passed ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan) certification.

Features

Key features:

  • 32bit, 48Mhz MCU
  • Memory:
    • 512kB Flash
    • 64kB on-chip SRAM / 32kB retention
  • RF transceiver:
    • Bluetooth Low Energy (BLE) 5.1 Compliant, 1Mbps, 2Mbps, Long Range 125kbps and 500kbps
  • Rx Sensitivity:
    • -96.5dBm@ Bluetooth Low Energy (BLE) 1Mbps
    • -100dBm@ IEEE802.15.4 250kbps
    • -94dBm @ Bluetooth Low Energy (BLE 2Mbps mode
    • Tx output power: up to +10dBm
  • Power management:
    • 1.8V~3.6V with Battery monitor for low battery voltage detection, USB 4.5~5.5V
  • Power performance:
    • RX: 5.3mA with DCDC, 10mA with LDO
    • TX: 4.8mA @ 0dBm with DCDC,9.5 with LDO
    • Deep Sleep with SRAM retention ~0.4uA
  • Digital and Analog interfaces:
    • Up to 32GPIOs
    • DMIC (Digital Mic), Dual AMIC (Analog Mic)
    • I2S, Stereo Audio output
    • SPI, I2C, USB, Swire
    • UART with hardware flow control and 7816 protocol support
    • USB
    • Up to 6 channels of differential PWM
    • IR transmitter with DMA
    • 14-bit 10-channel ( Only GPIO input) SAR ADC, Temperature sensor
  • Hardware OTA upgrade and multiple boot switch, allowing convenient product feature roll outs and upgrades
  • Package 48-pin TQFN 7x7x0.75mm, -40 – to – 85C

Applications:

  • Smart Lighting
  • Smart Home devices
  • Building Automation
  • Smart Grid
  • Health Care
  • Sports and fitness tracking
  • Wearable devices
  • Remote Controls
  • Wireless toys
  • Intelligent Logistics/Transportation/City
  • Consumer Electronics
  • Industrial Control
Request Datasheet