T2M9118-M
General Specifications
- Supports Wi-Fi 6, Bluetooth LE 5.4, Zigbee 3.0, Thread and Matter connectivity.
- Powered by a RISC-V processor operating at 160 MHz.
- Integrated 4 MB Flash and 576 KB SRAM.
- Supports Secure Boot and Root of Trust security features.
- Designed for low-power operation, with TX/RX current below 4 mA under specified conditions.
- Supports FR1 PCB antenna option.
- Listed certifications include FCC, IC, CE, TELEC, NCC, SRRC, RoHS, REACH and ESD (+2 kV).
Technical Specifications
- Supports 2.4 GHz Wi-Fi 6 (IEEE 802.11 b/g/n/ax).
- Integrates a dual-core 32-bit RISC-V MCU.
- Provides 18 GPIOs according to the official module selection table.
- Supports SDIO 3.0, SPI, I²C, UART and I²S peripheral interfaces.
- Measures 18 × 25.5 × 3.1 mm.
Key Applications
- Smart Home & Lighting
- Smart Switches & Plugs
- Smart Remote Controls
- Matter-enabled IoT Devices
- Wi-Fi + Bluetooth Gateways
- Industrial IoT Devices
T2M9201-M
General Specifications
High-performance dual-band Wi-Fi 6 + Bluetooth 5.4 combo module, integrating advanced wireless connectivity for high-speed data transmission, reliable communication, and low-power Bluetooth applications.
- Wi-Fi: IEEE 802.11ax/ac/a/b/g/n, dual-band 2.4 GHz & 5 GHz
- Wi-Fi Performance: 2×2 MIMO, up to 1201 Mbps PHY data rate
- Bluetooth: Bluetooth 5.4, Classic BT + BLE, LE Audio
- Security: WPA/WPA2/WPA3, WEP, WAPI
- Host Interface: SDIO 3.0 (up to 500 Mbps)
Key Features - Wi-Fi
- Wi-Fi 6 (802.11ax) with backward compatibility
- Dual-band 2.4 GHz / 5 GHz connectivity
- 2×2 MIMO with up to 1201 Mbps PHY rate
- 20 / 40 / 80 MHz channel bandwidth
- HE MCS11, 1024-QAM modulation
- DL/UL MU-MIMO & MU-OFDMA
- Beamforming for enhanced wireless performance
- STBC, LDPC/BCC for reliable transmission
- IEEE 802.11k/v/r for enhanced roaming
- P2P GO/GC support
Key Features - Bluetooth
- Bluetooth 5.4 Dual-Mode (BR/EDR + BLE)
- BLE Audio support
- BR/EDR, LE 1M / 2M / 500K / 125K PHY modes
- Up to 7 BR/EDR and 16 BLE ACL connections
- SCO over I²S for audio applications
- Intelligent Adaptive Frequency Hopping (AFH) for interference mitigation
Applications
- Smart TVs & Set-Top Boxes (STBs)
- OTT / Streaming Devices
- Android TV Boxes
- Smart Displays
- PCs & Laptops
- Tablets & Mobile Devices
- Smart Home Gateways
- Wi-Fi & Bluetooth Multimedia Devices
T2M9660-M
General Specifications
- Supports IEEE 802.11b/g/n/ax Wi-Fi 6 and Bluetooth LE 5.1 connectivity.
- Integrates a RISC processor with on-chip memory and peripheral interfaces.
- Supports Full MAC architecture with LMAC and UMAC.
- Offers Wi-Fi SoftAP, STA and Wi-Fi Direct operating modes.
- Supports 20/40 MHz Wi-Fi bandwidth, with 802.11ax limited to 20 MHz.
- Delivers Wi-Fi data rates up to 150 Mbps.
- Supports uplink and downlink MU-OFDMA, beamforming reception and WMM QoS.
- Supports BLE output power up to +10 dBm.
- Features BLE Adaptive Frequency Hopping, Data Length Extension and Link Layer encryption.
- Integrates PA, LNA, RF switch and power management circuitry.
- Shares RF circuitry between Wi-Fi and BLE, allowing only one radio subsystem to operate at a time.
Key Features
- Wi-Fi 6 connectivity optimized for smart-home IoT devices.
- Integrated Wi-Fi and BLE connectivity in a single module.
- Supports secure wireless communication and flexible network configurations.
- Compact SoC-based architecture with integrated RF components.
- BLE connectivity suitable for device provisioning and configuration.
Applications
- Smart Home Appliances
- Smart Plugs & Switches
- Smart Lighting Controllers
- Smart Thermostats & HVAC Controllers
- Smart Home Control Panels
- Wi-Fi-enabled Sensors & Monitoring Devices
- Smart Energy Meters
- Home Automation Controllers
- Industrial IoT Monitoring Devices
- BLE-assisted Wi-Fi Provisioning Devices