Wi-Fi+BLE Wi-Fi+BLE

Power-Efficient Wi-Fi+BLE SoCs

Our Wi-Fi+BLE SoCs offer reliable, low-power connectivity by combining Bluetooth LE and high-speed Wi-Fi in a single platform. Designed for co-existence, low latency, and energy efficiency, they enable seamless performance in smart, audio, and gaming devices. With integrated SDKs and reference designs, they accelerate development while reducing cost.

Technical Highlights

  1. Dual-Mode Connectivity: Supports Wi-Fi 6 (802.11ax) and Bluetooth LE for flexible, high-performance wireless communication across diverse applications
  2. Seamless Co-existence: Features a Full-MAC architecture with advanced co-existence control to ensure stable simultaneous operation of Wi-Fi and Bluetooth
  3. Ultra-Low Power Design: Incorporates Target Wake Time (TWT) and optimized low-power modes to achieve superior energy efficiency and extended device life
  4. Enhanced Security: Integrates WPA3, AES encryption, secure boot, and hardware cryptographic engines to ensure robust data protection
  5. High Integration: Combines built-in PA, LNA, and RF components, minimizing external circuitry for a compact and cost-efficient SoC design

T2M6600

The T2M6600 Series is a low-power Wi-Fi + Bluetooth® LE combo SoC designed for smart home and IoT devices. It supports Wi-Fi 6 (802.11 ax/b/g/n) + BLE 5.0, 2.4GHz, 20MHz BW, integrating Full MAC Wi-Fi, RF, power management, and amplifiers into a single chip. Powered by a 240 MHz RISC processor with rich peripheral interfaces and strong security, it enables flexible, secure, and energy-efficient wireless designs across a wide range of applications.

T2M6600
  • Protocol: Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0
  • MCU: RISC CPU, up to 240MHz
  • SRAM: 512KB SRAM
  • Flash: 2MB/ 4MB SiP flash + supports external flash
  • Rich Interface: UART, SPI, I2C, I2S, PWM, ADC, SDIO 2.0, GPIO (up to 25)
  • Supply Voltage: 3.3V (VBAT 3.0–3.6V, typ. 3.3V)
  • Working Current: (typical)
    • Wi-Fi RX: 83mA (802.11b, -80dBm)
    • Wi-Fi TX: 333mA (802.11b 11Mbps, +17dBm)
  • Sleep Current:
    • Light Sleep: 964µA
    • Deep Sleep: 304µA
    • Shutdown: <1µA
  • TX Maximum Power: up to 21 dBm (802.11b 11Mbps)
  • RX Receive Sensitivity:
    • Wi-Fi: -94 dBm (802.11b 1M, typical)
    • BLE: -92 dBm (1Mbps, CH0)
  • Security Mechanism: AES128, HASH, ECC, TRNG + Flash encryption + Secure boot

Applications

  • Smart plug
  • Smart lighting
  • Smart switch
  • Refrigerator / Air conditioner / Washing machine
  • Thermostat / Sweeping robot

Product Specifications

Product Selection Tool
Part No. Protocol MCU-MHz SRAM (KB) Flash (KB) SPI I2C I2S GPIO UART USB ADC Voltage PKG NODE
T2M6600A32 Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0 160 512 2048 / 4096 (SiP) 3 2 1 upto 25 3 0 - 3.0 – 3.6 V QFN32 and QFN40 -

T2M6630

The T2M6630 is a highly integrated Wi-Fi and Bluetooth® LE combo SoC built around an ARM StarSE MCU based on Armv8-M with TrustZone security. It supports 2.4 GHz, 20MHz / 40MHz bandwidth, 1x1 802.11 b/g/n/ax Wi-Fi and BLE, delivering reliable, long-range wireless performance with low power consumption, optimized RF and baseband design, high-speed SDIO, rich peripheral interfaces, and embedded memory make it ideal for secure, cost-effective IoT and smart-device applications.

T2M6630
  • Protocol: Wi-Fi 6 (802.11 b/g/n/ax, 1T1R, 2.4GHz) + BLE 5.0
  • MCU: ARM China StarSE
  • MCU up to 160MHz, TrustZone-M
  • SRAM: 512KB SRAM
  • Flash: SiP 4MB FLASH (optional) + supports XIP on flash
  • Rich Interface: SDIO 2.0, SPI, I2C, I2S, UART, AUXADC, PWM, GPIOs
  • Supply Voltage: Single 3.3V power supply input
  • Working Current:
    • Wi-Fi TX: 288mA (11b 11Mbps, Pout=+20dBm)
    • Wi-Fi RX: ~50.5mA (11b 11Mbps, -60dBm)
  • Sleep Current: Light sleep: 50µA | Deep sleep: 27µA | Shutdown: 2µA
  • TX Maximum Power:
    • Wi-Fi: up to 20dBm (CCK 1~11Mbps)
    • BLE: up to 10dBm
  • RX Receive Sensitivity:
    • Wi-Fi: -98dBm (1Mbps CCK)
    • BLE: -99dBm (1Mbps), -96dBm (2Mbps)
  • Security Mechanism: TRNG, Secure boot, AES, Hash, ECC, Flash encryption

Applications

  • Smart home
  • Smart lighting
  • Wi-Fi + BLE combo modules
  • Sensors and controllers
  • Smart switches / plugs

Product Specifications

Product Selection Tool
Part No. Protocol MCU-MHz SRAM (KB) Flash (KB) SPI I2C I2S GPIO UART USB ADC Voltage PKG NODE
T2M6630A40 Wi-Fi 6 (802.11 b/g/n/ax, 2.4 GHz) + BLE 5.0 240 512 4096 (SiP, optional) 2 (SPI0 + SPI1) 1 1 23 1 0 12 Single 3.3 V QFN40, 5 × 5 mm -

T2M6700

The T2M6700 series is a highly integrated, cost-efficient wireless combo solution designed for high performance with optimized power consumption. It combines Wi-Fi 6 + Bluetooth 5.0 functionality within a single chip, integrating a Wi-Fi 6–compliant MAC, 1T1R baseband, and RF front end into a compact architecture. The device supports 2.4GHz / 5GHz, 40MHz bandwidth, 256 QAM modulation, SDIO 3.0, USB 2.0, and high-speed UART interfaces for flexible host connectivity, and enables coordinated Wi-Fi and Bluetooth operation through time-division duplex (TDD) co-existence technology.

T2M6700
  • Protocol: Wi-Fi 6 (802.11b/g/n/ax 1T1R 2.4/5G) + BLE 5.0
  • MCU: RISC-V CPU, up to 240MHz
  • SRAM: 512K. Support 0/4/8/16M PSRAM SiP or Q-SPI external
  • Flash: 0/2/4/8/16MB SiP or Q-SPI external
  • Rich Interface: GPIO, UART , SPI, IIC, Q-SPI, IIS, SDIO3.0 S, SDIO2.0 H/S, USB 2.0 H/D, ADC, Msps
  • Supply Voltage: 3.3V +/-10%
  • Working Current
    • Wi-Fi RX: TBD
    • Wi-Fi TX: TBD
  • Sleep Current
    • Light Sleep: TBD
    • Deep Sleep: TBD
    • Shutdown: TBD
  • TX Maximum Power: TBD
  • RX Receive Sensitivity
    • Wi-Fi: TBD
    • BLE: TBD
  • Security Mechanism: TBD

Applications

  • IP Camera
  • MiFi
  • Wireless Projector
  • Wi-Fi Audio
  • Home Appliances
  • Kitchen Appliance
  • Thermostat
  • Industrial Automation

Product Specifications

Product Selection Tool
Part No. Protocol MCU-MHz SRAM (KB) Flash (KB) SPI I2C I2S GPIO UART USB ADC Voltage PKG NODE
T2M6700A48 Wi-Fi 6 (802.11 a/b/g/n/ax) + Bluetooth 5.0 240 512 External 0 / 2 / 4 / 8 / 16 MB Q-SPI 2 2 1 21 3 2 12 3.3 V ±10% QFN48 5 × 5 mm -

All Part Numbers

Global Search

Series Supplier Part No. Protocol MCU-MHz SRAM (KB) Flash (KB) SPI I2C GPIO USB ADC Datasheet
T2M6600 T2M6600A32 Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0 160 512 2048 / 4096 (SiP) 3 2 upto 25 0 - N/A
T2M6630 T2M6630A40 Wi-Fi 6 (802.11 b/g/n/ax, 2.4 GHz) + BLE 5.0 240 512 4096 (SiP, optional) 2 (SPI0 + SPI1) 1 23 0 12 N/A
T2M6700 T2M6700A48 Wi-Fi 6 (802.11 a/b/g/n/ax) + Bluetooth 5.0 240 512 External 0 / 2 / 4 / 8 / 16 MB Q-SPI 2 2 21 2 12 N/A