Technical Highlights
- Dual-Band Concurrency: Simultaneous 2.4 + 5 GHz with STA+AP, STA+P2P support
- Wi-Fi 6 Performance: 2x2 MU-MIMO, 1024-QAM, up to 1.2 Gbps, 80 MHz bandwidth
- Low-Power RF Design: Proprietary CMOS PA ideal for STBs, tablets, and mobile devices
- Integrated RISC-V SoC: Built-in CPU, MAC, baseband, RF, Flash, BLE
- Wi-Fi + Bluetooth Co-existence: BT 5.4, BLE Audio, optimized shared RF operation
T2M6600
The T2M6600 Series is a low-power Wi-Fi + Bluetooth® LE combo SoC designed for smart home and IoT devices. It supports Wi-Fi 6 (802.11 ax/b/g/n) + BLE 5.0, 2.4GHz, 20MHz BW, integrating Full MAC Wi-Fi, RF, power management, and amplifiers into a single chip. Powered by a 240 MHz RISC processor with rich peripheral interfaces and strong security, it enables flexible, secure, and energy-efficient wireless designs across a wide range of applications.
- Protocol: Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0
- MCU: RISC CPU, up to 240MHz
- SRAM: 512KB SRAM
- Flash: 2MB/ 4MB SiP flash + supports external flash
- Rich Interface: UART, SPI, I2C, I2S, PWM, ADC, SDIO 2.0, GPIO (up to 25)
- Supply Voltage: 3.3V (VBAT 3.0–3.6V, typ. 3.3V)
-
Working Current: (typical)
- Wi-Fi RX: 83mA (802.11b, -80dBm)
- Wi-Fi TX: 333mA (802.11b 11Mbps, +17dBm)
-
Sleep Current:
- Light Sleep: 964µA
- Deep Sleep: 304µA
- Shutdown: <1µA
- TX Maximum Power: up to 21 dBm (802.11b 11Mbps)
-
RX Receive Sensitivity:
- Wi-Fi: -94 dBm (802.11b 1M, typical)
- BLE: -92 dBm (1Mbps, CH0)
- Security Mechanism: AES128, HASH, ECC, TRNG + Flash encryption + Secure boot
Applications
- Smart plug
- Smart lighting
- Smart switch
- Refrigerator / Air conditioner / Washing machine
- Thermostat / Sweeping robot
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M6600A32 | Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0 | 160 | 512 | 2048 / 4096 (SiP) | 3 | 2 | 1 | upto 25 | 3 | 0 | - | 3.0 – 3.6 V | QFN32 and QFN40 | - |
T2M6630
The T2M6630 is a highly integrated Wi-Fi and Bluetooth® LE combo SoC built around an ARM StarSE MCU based on Armv8-M with TrustZone security. It supports 2.4 GHz, 20MHz / 40MHz bandwidth, 1x1 802.11 b/g/n/ax Wi-Fi and BLE, delivering reliable, long-range wireless performance with low power consumption, optimized RF and baseband design, high-speed SDIO, rich peripheral interfaces, and embedded memory make it ideal for secure, cost-effective IoT and smart-device applications.
- Protocol: Wi-Fi 6 (802.11 b/g/n/ax, 1T1R, 2.4GHz) + BLE 5.0
- MCU: ARM China StarSE
- MCU up to 160MHz, TrustZone-M
- SRAM: 512KB SRAM
- Flash: SiP 4MB FLASH (optional) + supports XIP on flash
- Rich Interface: SDIO 2.0, SPI, I2C, I2S, UART, AUXADC, PWM, GPIOs
- Supply Voltage: Single 3.3V power supply input
-
Working Current:
- Wi-Fi TX: 288mA (11b 11Mbps, Pout=+20dBm)
- Wi-Fi RX: ~50.5mA (11b 11Mbps, -60dBm)
- Sleep Current: Light sleep: 50µA | Deep sleep: 27µA | Shutdown: 2µA
-
TX Maximum Power:
- Wi-Fi: up to 20dBm (CCK 1~11Mbps)
- BLE: up to 10dBm
-
RX Receive Sensitivity:
- Wi-Fi: -98dBm (1Mbps CCK)
- BLE: -99dBm (1Mbps), -96dBm (2Mbps)
- Security Mechanism: TRNG, Secure boot, AES, Hash, ECC, Flash encryption
Applications
- Smart home
- Smart lighting
- Wi-Fi + BLE combo modules
- Sensors and controllers
- Smart switches / plugs
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M6630A40 | Wi-Fi 6 (802.11 b/g/n/ax, 2.4 GHz) + BLE 5.0 | 240 | 512 | 4096 (SiP, optional) | 2 (SPI0 + SPI1) | 1 | 1 | 23 | 1 | 0 | 12 | Single 3.3 V | QFN40, 5 × 5 mm | - |
T2M9001
The T2M9001 Wi-Fi SoC is a high-performance 2.4 GHz wireless platform built for IEEE 802.11 b/g/n connectivity. It integrates the RF front end, PHY and MAC, a RISC-V processor, on-chip OTP, USB interface, and power management within a single compact chip. This high level of integration enables reliable wireless performance, reduced system complexity, and efficient power operation for a wide range of connected devices.
- Protocol: IEEE 802.11 b/g/n WLAN (1T1R, 20MHz)
- MCU: RISC-V CPU up to 160MHz
- SRAM: 224KB on-chip SRAM
- Flash: Embedded / External flash
- Rich Interface: USB 2.0 (up to 480Mbps), High-speed UART, 7× GPIO, Watchdog, GP Timers
- Supply Voltage: 3.3V supply integrated LDOs
- Security Mechanism: Encryption: Open / WEP40 / WEP104 / TKIP / AES128 (STA), Open / AES128 (AP). Authentication: WEP share-key / WPA / WPA2 (STA), WPA2 (AP)
Applications
- IP camera
- TV
- Set-top box
- Access point
- PC
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M9001A24 | Wi‑Fi 802.11 b/g/n | 160 | 224 | OTP 1 Kb | 1 | 1 | 0 | 7 | 1 | 1 | - | 3.3 V | 4x4 mm2, 24-pin QFN | 22nm |
T2M9101
The T2M9101 Wi-Fi 6 SoC is a dual-band, dual-concurrent (DBDC) wireless platform designed for high-performance connectivity across 2.4 GHz and 5 GHz bands. It supports IEEE 802.11ax while maintaining compatibility with 802.11a/b/g/n/ac networks. Powered by four high-performance RISC-V processors, enabling high-speed data interfaces, flexible peripheral integration, and advanced RF and baseband performance for demanding wireless applications.
- Protocol: Wi-Fi 6 (802.11a/b/g/n/ac/ax) dual-band DBDC (2.4GHz + 5GHz), Bluetooth 5.3 (BT/BLE + BLE audio)
- MCU: Five high-performance 32-bit RISC-V CPUs
- SRAM: On-chip 136KB SRAM (DTOP) + 768KB Wi-Fi RAM + 210KB BT RAM
- Flash: Embedded / External flash (up to 16MB address space)
- Rich Interface: USB2.0, SDIO3.0 (slave), UART, SPI (master/slave), I2C (master/slave), I2S, GPIO
- Supply Voltage: VDD33: 2.97–3.63V, VDD18: 1.75–1.98V, VDD12/AVDD: 1.15–1.32V, VDD08: 0.75–0.98V
-
Working Current:
- Wi-Fi Transceiver DBDC: 280mA
- Wi-Fi 5G Transceiver: 160mA
- Wi-Fi 2G Transceiver: 140mA
-
Sleep Current:
- Wi-Fi DTIM: 1.0mA
- BT Sniff: 0.80mA
- TX Maximum Power: Wi-Fi 2.4GHz Tx power up to 21 dBm (MCS0) / Wi-Fi 5GHz up to 20 dBm (MCS0)
- RX Receive Sensitivity: Wi-Fi 2.4GHz: -101 dBm (11b 1Mbps) / BLE<: -101 dBm (LE 1M), -98 dBm (LE 2M)
- Security Mechanism: WPA/WPA2/WPA3, WEP, WAPI
Applications
- TVs
- Tablets
- PCs / Laptops
- Mobile phones
- Smart speakers
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M9101A126 | Wi‑Fi 802.11 b/g/n | 120 | 224 | OTP 1 Kb | 1 | 1 | 0 | 7 | 1 | 1 | - | 3.3 V | Not specified | 22nm |
T2M9201
The T2M9201 Wi-Fi chipset is built on WUQI’s proprietary dual-band RF architecture and advanced low-power CMOS power-amplifier technology, enabling simultaneous 2.4 GHz and 5 GHz operation (DBDC) with high efficiency. It delivers high data throughput, stable wireless links, and optimized power consumption, making it well suited for performance-driven devices such as Smartphones, Tablets, PCs, TVs, and Set-top boxes that require fast and reliable wireless connectivity.
- Protocol: Wi-Fi 6 (IEEE 802.11ax) + backward compatible 802.11a/b/g/n/ac, Dual-band DBDC (2.4GHz + 5GHz), Bluetooth 5.4 (BT/BLE, LE Audio)
- MCU: Five 32-bit RISC-V CPUs (Wi-Fi subsystem: 2 CPUs, DTOP: 2 CPUs, BT: 1 CPU)
- SRAM: On-chip SRAM includes: 136KB (DTOP) + 928KB (Wi-Fi subsystem RAM) + 98KB (Bluetooth subsystem RAM)
- Flash: Embedded / External flash (address space supports up to 16MB)
- Rich Interface: UART, I2C, SPI, I2S, GPIO, Watchdog, SDIO3.0, USB2.0
-
Supply Voltage:
- VDD33: 3.3V (2.97–3.63V)
- VDD18: 1.8V (1.75–1.98V)
- VDD12/AVDD: 1.2V (1.15–1.32V)
- VDD09: 0.8–0.9V (0.75–0.98V)
-
Working Current:
- Wi-Fi Transceiver DBDC: 280mA
- Wi-Fi 5G Transceiver: 160mA
- Wi-Fi 2G Transceiver: 140mA
-
Sleep Current:
- Wi-Fi DTIM: 1.0mA
- BT sniff: 0.80mA
- TX Maximum Power: Wi-Fi Tx power per chain: up to 20 dBm (2.4GHz, 802.11b 11Mbps)
- RX Receive Sensitivity: Wi-Fi Rx sensitivity: -99 dBm (2.4GHz, 802.11b 1Mbps, 1x1 20MHz)
- Security Mechanism: WPA/WPA2/WPA3, WEP, WAPI; HW security blocks include SHA, TRNG, RSA 4096, ECC
Applications
- Smartphones
- Tablets
- PCs / Laptops
- Televisions (Smart TV)
- Set-top boxes
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M9201A92 | Wi-Fi 6 (IEEE 802.11 a/b/g/n/ac/ax), Dual-Band DBDC 2.4 GHz & 5 GHz | 120 | 136 | upto 16 MB | 2 | 2 | 2 | 40 | 4 | 1 | - | 3.3 V / 1.8 V / 1.2 V / 0.8–0.9 V | QFN 9 × 7.5 | 22nm |
All Part Numbers
Global Search
| Series | Supplier Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | GPIO | USB | ADC | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M6600 | T2M6600A32 | Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0 | 160 | 512 | 2048 / 4096 (SiP) | 3 | 2 | upto 25 | 0 | - | N/A |
| T2M6630 | T2M6630A40 | Wi-Fi 6 (802.11 b/g/n/ax, 2.4 GHz) + BLE 5.0 | 240 | 512 | 4096 (SiP, optional) | 2 (SPI0 + SPI1) | 1 | 23 | 0 | 12 | N/A |
| T2M9001 | T2M9001A24 | Wi‑Fi 802.11 b/g/n | 160 | 224 | OTP 1 Kb | 1 | 1 | 7 | 1 | - | N/A |
| T2M9101 | T2M9101A126 | Wi‑Fi 802.11 b/g/n | 120 | 224 | OTP 1 Kb | 1 | 1 | 7 | 1 | - | N/A |
| T2M9201 | T2M9201A92 | Wi-Fi 6 (IEEE 802.11 a/b/g/n/ac/ax), Dual-Band DBDC 2.4 GHz & 5 GHz | 120 | 136 | upto 16 MB | 2 | 2 | 40 | 1 | - | N/A |