Technical Highlights
- Native IP Connectivity: Runs matter directly over standard Wi-Fi, enabling high-throughput, low-latency communication without additional hubs
- Dual-Mode Wireless Support: Integrated Wi-Fi and Bluetooth® LE for streamlined commissioning, improved pairing, and flexible application development
- Optimized for IoT Devices: Low-power wireless MCU architecture designed for always-connected, cloud-ready products
- Secure & Reliable: Supports secure onboarding, encrypted communication, and OTA updates to meet modern IoT security standards
T2M6600
The T2M6600 Series is a low-power Wi-Fi + Bluetooth® LE combo SoC designed for smart home and IoT devices. It supports Wi-Fi 6 (802.11 ax/b/g/n) + BLE 5.0, 2.4GHz, 20MHz BW, integrating Full MAC Wi-Fi, RF, power management, and amplifiers into a single chip. Powered by a 240 MHz RISC processor with rich peripheral interfaces and strong security, it enables flexible, secure, and energy-efficient wireless designs across a wide range of applications.
- Protocol: Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0
- MCU: RISC CPU, up to 240MHz
- SRAM: 512KB SRAM
- Flash: 2MB/ 4MB SiP flash + supports external flash
- Rich Interface: UART, SPI, I2C, I2S, PWM, ADC, SDIO 2.0, GPIO (up to 25)
- Supply Voltage: 3.3V (VBAT 3.0–3.6V, typ. 3.3V)
-
Working Current: (typical)
- Wi-Fi RX: 83mA (802.11b, -80dBm)
- Wi-Fi TX: 333mA (802.11b 11Mbps, +17dBm)
-
Sleep Current:
- Light Sleep: 964µA
- Deep Sleep: 304µA
- Shutdown: <1µA
- TX Maximum Power: up to 21 dBm (802.11b 11Mbps)
-
RX Receive Sensitivity:
- Wi-Fi: -94 dBm (802.11b 1M, typical)
- BLE: -92 dBm (1Mbps, CH0)
- Security Mechanism: AES128, HASH, ECC, TRNG + Flash encryption + Secure boot
Applications
- Smart plug
- Smart lighting
- Smart switch
- Refrigerator / Air conditioner / Washing machine
- Thermostat / Sweeping robot
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M6600A32 | Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0 | 160 | 512 | 2048 / 4096 (SiP) | 3 | 2 | 1 | upto 25 | 3 | 0 | - | 3.0 – 3.6 V | QFN32 and QFN40 | - |
T2M6630
The T2M6630 is a highly integrated Wi-Fi and Bluetooth® LE combo SoC built around an ARM StarSE MCU based on Armv8-M with TrustZone security. It supports 2.4 GHz, 20MHz / 40MHz bandwidth, 1x1 802.11 b/g/n/ax Wi-Fi and BLE, delivering reliable, long-range wireless performance with low power consumption, optimized RF and baseband design, high-speed SDIO, rich peripheral interfaces, and embedded memory make it ideal for secure, cost-effective IoT and smart-device applications.
- Protocol: Wi-Fi 6 (802.11 b/g/n/ax, 1T1R, 2.4GHz) + BLE 5.0
- MCU: ARM China StarSE
- MCU up to 160MHz, TrustZone-M
- SRAM: 512KB SRAM
- Flash: SiP 4MB FLASH (optional) + supports XIP on flash
- Rich Interface: SDIO 2.0, SPI, I2C, I2S, UART, AUXADC, PWM, GPIOs
- Supply Voltage: Single 3.3V power supply input
-
Working Current:
- Wi-Fi TX: 288mA (11b 11Mbps, Pout=+20dBm)
- Wi-Fi RX: ~50.5mA (11b 11Mbps, -60dBm)
- Sleep Current: Light sleep: 50µA | Deep sleep: 27µA | Shutdown: 2µA
-
TX Maximum Power:
- Wi-Fi: up to 20dBm (CCK 1~11Mbps)
- BLE: up to 10dBm
-
RX Receive Sensitivity:
- Wi-Fi: -98dBm (1Mbps CCK)
- BLE: -99dBm (1Mbps), -96dBm (2Mbps)
- Security Mechanism: TRNG, Secure boot, AES, Hash, ECC, Flash encryption
Applications
- Smart home
- Smart lighting
- Wi-Fi + BLE combo modules
- Sensors and controllers
- Smart switches / plugs
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M6630A40 | Wi-Fi 6 (802.11 b/g/n/ax, 2.4 GHz) + BLE 5.0 | 240 | 512 | 4096 (SiP, optional) | 2 (SPI0 + SPI1) | 1 | 1 | 23 | 1 | 0 | 12 | Single 3.3 V | QFN40, 5 × 5 mm | - |
T2M6700
The T2M6700 series is a highly integrated, cost-efficient wireless combo solution designed for high performance with optimized power consumption. It combines Wi-Fi 6 + Bluetooth 5.0 functionality within a single chip, integrating a Wi-Fi 6–compliant MAC, 1T1R baseband, and RF front end into a compact architecture. The device supports 2.4GHz / 5GHz, 40MHz bandwidth, 256 QAM modulation, SDIO 3.0, USB 2.0, and high-speed UART interfaces for flexible host connectivity, and enables coordinated Wi-Fi and Bluetooth operation through time-division duplex (TDD) co-existence technology.
- Protocol: Wi-Fi 6 (802.11b/g/n/ax 1T1R 2.4/5G) + BLE 5.0
- MCU: RISC-V CPU, up to 240MHz
- SRAM: 512K. Support 0/4/8/16M PSRAM SiP or Q-SPI external
- Flash: 0/2/4/8/16MB SiP or Q-SPI external
- Rich Interface: GPIO, UART , SPI, IIC, Q-SPI, IIS, SDIO3.0 S, SDIO2.0 H/S, USB 2.0 H/D, ADC, Msps
- Supply Voltage: 3.3V +/-10%
-
Working Current
- Wi-Fi RX: TBD
- Wi-Fi TX: TBD
-
Sleep Current
- Light Sleep: TBD
- Deep Sleep: TBD
- Shutdown: TBD
- TX Maximum Power: TBD
-
RX Receive Sensitivity
- Wi-Fi: TBD
- BLE: TBD
- Security Mechanism: TBD
Applications
- IP Camera
- MiFi
- Wireless Projector
- Wi-Fi Audio
- Home Appliances
- Kitchen Appliance
- Thermostat
- Industrial Automation
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M6700A48 | Wi-Fi 6 (802.11 a/b/g/n/ax) + Bluetooth 5.0 | 240 | 512 | External 0 / 2 / 4 / 8 / 16 MB Q-SPI | 2 | 2 | 1 | 21 | 3 | 2 | 12 | 3.3 V ±10% | QFN48 5 × 5 mm | - |
T2M9118-M
The ML9118A-GAIA-M0-PG12 is a general-purpose wireless module supporting Wi-Fi 6, Bluetooth® Low Energy, and IEEE 802.15.4. It features a 32-bit RISC-V application processor (up to 160MHz) with embedded SRAM/ROM. The Wi-Fi subsystem includes a 2.4GHz radio with 802.11 b/g/n/ax PHY/MAC for low latency, longer range, and low power operation, along with a compact MCU that offloads processing tasks. The Bluetooth LE subsystem integrates the radio, modem, link controller, and Bluetooth Mesh, using the same MCU for firmware operation. In addition, the 2.4GHz radio supports 802.15.4, enabling Zigbee and Thread functionality.
- Protocol: Wi-Fi 6 (802.11 b/g/n/ax, 2.4GHz), Bluetooth® LE 5.4, IEEE 802.15.4 (Zigbee/Thread), Matter over Wi-Fi/Thread
- MCU: 32-bit RISC-V MCU (5-stage pipeline) up to 160MHz + dedicated 32-bit MCU for Wi-Fi/BLE
- SRAM: 576KB SRAM (includes up to 32KB AON SRAM)
- Flash: 4MB Flash (SiP)
- Rich Interface: GPIO (up to 19), UART, I2C, SPI, I2S, PWM, 12-bit ADC, SDIO 2.0 device, DMA
- Supply Voltage: 3.0V: 3.6V (typ. 3.3V)
-
Working Current:
- Wi-Fi TX: 159mA (11b/g @17dBm) / 142mA (11ax @15.5dBm)
- Wi-Fi RX: 50–58mA
- BLE TX: 95.4mA @0dBm / 136.7mA @10dBm
- BLE RX: 56mA
-
Sleep Current:
- Deep Sleep (retention): 90µA
- Hibernation: 64µA
-
TX Maximum Power:
- Wi-Fi TX power (typ): 17.4dBm (11g/n/ax)
- BLE TX (max setting): 15dBm
- 802.15.4 TX: 15dBm
-
RX Receive Sensitivity:
- Wi-Fi: -94dBm (11b 1Mbps)
- BLE: -95dBm (LE 1Mbps)
- 802.15.4: -98dBm (250kbps)
- Security Mechanism: Secure Boot, Flash encryption, AES-128/AES-256, SHA, RSA/ECC signature, TRNG
Applications
- Remote control
- Smart home devices
- Smart lighting devices
- AI audio
Product Specifications
Product Selection Tool| Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | I2S | GPIO | UART | USB | ADC | Voltage | PKG | NODE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M9118A40 | Wi-Fi 6 (802.11 b/g/n/ax), Bluetooth® LE 5.4, Zigbee 3.0, Thread, Matter | 160 | 576 | 4096 | 3 | 2 | 1 | 19 | 3 | 0 | 12 | 3.0 V – 3.6 V | 18.0 × 25.5 × 3.1 | 22nm |
All Part Numbers
Global Search
| Series | Supplier Part No. | Protocol | MCU-MHz | SRAM (KB) | Flash (KB) | SPI | I2C | GPIO | USB | ADC | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T2M6600 | T2M6600A32 | Wi-Fi 6 (802.11 b/g/n/ax) + BLE 5.0 | 160 | 512 | 2048 / 4096 (SiP) | 3 | 2 | upto 25 | 0 | - | N/A |
| T2M6630 | T2M6630A40 | Wi-Fi 6 (802.11 b/g/n/ax, 2.4 GHz) + BLE 5.0 | 240 | 512 | 4096 (SiP, optional) | 2 (SPI0 + SPI1) | 1 | 23 | 0 | 12 | N/A |
| T2M6700 | T2M6700A48 | Wi-Fi 6 (802.11 a/b/g/n/ax) + Bluetooth 5.0 | 240 | 512 | External 0 / 2 / 4 / 8 / 16 MB Q-SPI | 2 | 2 | 21 | 2 | 12 | N/A |
| T2M9118-M | T2M9118A40 | Wi-Fi 6 (802.11 b/g/n/ax), Bluetooth® LE 5.4, Zigbee 3.0, Thread, Matter | 160 | 576 | 4096 | 3 | 2 | 19 | 0 | 12 | N/A |